HPE ARUBA 2930 Series 2930F 48G PoE+ 4SFP+ Switch [JL256A]

(0 customer reviews)
Rp 88.410.700
7 Kg
Ready Stock
ELING
1
  • Convenient built in 10GbE uplinks and up to 740W PoE+
  • Simple Deployment with Zero Touch Provisioning
  • Single view of the network
I/O ports and slots
  • 48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
  • 4 SFP+ 1/10GbE ports; PHY-less
Additional ports and slots 1 dual-personality (RJ-45 or USB micro-B) serial console port
Memory and processor Dual Core ARM Coretex @ 1016 MHz, 1 GB DDR3 SDRAM; Packet buffer size: 12.38 MB 4.5MB Ingress/7.875MB Egress, 4 GB eMMC
Performance IPv6 Ready Certifi
1,000 Mb Latency < 3.8 μs (64-byte packets)
10 Gbps Latency < 1.6 μs (64-byte packets)
Throughput up to 112.0 Mpps
Switching capacity 176 Gbps
Routing table size 2,000 IPv4, 1,000 IPv6 in hardware, 200 OSPF, 256 Static, 10,000 RIP
MAC address table size 32,768 entries
Operating temperature 32°F to 113°F (0°C to 45°C); up to 5,000 Feet, 0°C to 40°C (32°F to 104°F) up to 10,000 Feet
Operating relative humidity 15% to 95% @ 104°F (40°C), noncondensing
Non-operating/Storage temperature -40°F to 158°F (-40°C to 70°C); up to 15,000 Feet
Non-operating/Storage relative humidity 15% to 95% @ 149°F (65°C)
Acoustic Power: 55.7 dB, Pressure: 41.7 dB
Airflow direction Side-to-side
Frequency 50/60 Hz
Maximum heat dissipation 293.0 BTU/hr (309.1 kj/hr)
Voltage 100 - 127 / 200 - 240 VAC, rated
Maximum power rating 459 W
Idle power 48.6 W
Dimension 44.25 x 30.42 x 4.39 cm

 

Detail

HPE ARUBA
0
0 out of 5 0 customer reviews
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

There are no reviews for this product.

Related Products

You might also like